Maintenance - Yetter TITAN Series Owner's Manual

Storing the Equipment
Store the machine in an area away from human activity.
Store the machine in a RAISED position.
Install service locks on all wheel cylinders.
At the end of the season, the machine should be thoroughly inspected and
prepared for storage. Repair or replace any worn or damaged components
to prevent down time at the start of the next season. Store the machine
under cover with all parts in operating condition.
 Clean machine thoroughly to remove all dirt, debris, and crop residue
which would hold moisture and cause rusting.
 Inspect machine for worn or broken parts. See your Yetter Farm
Equipment dealer during the off-season so that parts or service can
be acquired when the machine is not needed in the field.
 Lubricate all bearings as outlined in the lubrication section.
 Paint all parts which are chipped or worn.
 Store machine in a clean, dry place that is out of the sun.
 If the machine cannot be stored inside, cover with a waterproof
tarpaulin and tie securely in place.
 Do not allow children to play on or around the machine.
16

MAINTENANCE