SureCall M2M User Manual page 4

Installing your Hardware
You can leave the booster on top of a flat surface or use the enclosed Velcro straps
to mount it. To prevent damage to the booster, before plugging in the booster to an
AC power outlet.
1. Select a location close to a working AC outlet. Do not expose the signal booster to
excessive heat, direct sunlight, moisture, and airtight enclosures.
2. Connect the AC power cord to the booster.
3. Connect the outside antenna cable to the signal booster connector marked OUTSIDE.
Hand-tighten the connection.
4. Connect the RG58 modem cable to the signal booster connector marked INSIDE.
Hand-tighten the connection.
5. Connect the plug on the other end of the 110V AC power outlet.
6. The booster turns on automatically. The LED light will glow indicating that the booster
is ready to use.
4
https://www.signalbooster.com | 1-855-846-2654 | sales@signalbooster.com