Specifications; Troubleshooting; Kitting Information - SureCall M2M User Manual

Troubleshooting

Problem
Signal booster has no power
After installing your signal
booster system, you have
no signal or reception.
Radio or electronic receiver
interference

Specifications

Uplink Frequency Range (MHz):
Downlink Frequency Range (MHz):
Supported Standards:
Maximum Gain:
Noise Figure:
Input/Output Impedance:
VSWR:
AC Power Transofmer
Maximum Output Power:
Cable:
RF Connectors:
Power Consumption:
Dimensions:
Weight:
FCC ID (USA)

Kitting Information

Component
Magnetic Mount Antenna
M2M Cable
https://www.signalbooster.com | 1-855-846-2654 | sales@signalbooster.com
Resolution
Make sure the power supply is plugged in. If the power LED is still off,
return the power supply to SureCall. Contact tech support at
855-846-2654, or go to https://www.signalbooster.com and log on
to online suport to receive a Return Merchandise Authorization (RMA).
Verify that all signal booster and antenna cable connections are secure.
Add additional separation between the booster and these devices
1850-1910
1930-1990
CDMA, GSM, EDVO, EDGE, HSPA
15 dB
5 dB
50Ω
≤2.0
110VAC, 60Hz IN / 5-12V DC OUT
1 Watt EIRP
RG58
SMA Female Connectors (both ends)
<10W
4-7/8"x 2.75" x 1"
0.57
RSNM2M
Product Number Description
SC- 200-S-S
RG58 (Modem to Booster Cable)
Specifications
824-849
869-894
5