Configuring The Ethernet Connection - CAME XTS 7IP BK WIFI Installation And Setting Manual

Network
Ethernet
Enabled
Wireless
Enabled
Default gateway
Ethernet
DNS
19:02
1

Configuring the Ethernet connection

Type of connection Ethernet
D
Mode
E
IP address
F
Netmask
G
Gateway
MAC address
19:02
2
D Lets you choose the type of address from:
DHCP
The device's IP address is assigned by the DHCP server; if there are no special needs, this mode lets you
continue with the settings without adding any additional data.
Static
The device's IP address is manually assigned.
E IF you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of
the router and of the other connected devices.
F If the netmask is different from the default one, provide the proper netmask.
G Provide the default gateway for your network.
Disabled
Configure Ethernet
Disabled
Configure WiFi
B
WiFi
C
Save
Thursday
01 Feb 2018
DHCP Static
Save
Thursday
01 Feb 2018
A
Info Back Home
Info Back Home
This section is for establishing in
which way the device connects to
the network.
A Enable/disable the types of
wanted connections
B Select whether the gateway
connection happens via the Ether-
net or WiFi network.
C Enter a valid DNS address to
have the CAMEConnect connection
(for example,