Advanced Settings; Configuring The Ethernet Connection - CAME XTS 7IP WH WIFI User Manual

Advanced settings

On master indoor receiver
Network
CAME Connect
Credentials
Automatic door opener
Configuring the user interface
Maintenance
19:02
Network
Ethernet
Wireless
Default gateway
DNS
19:02
1

Configuring the Ethernet connection

Type of connection Ethernet
D
Mode
E
IP address
F
Netmask
G
Gateway
MAC address
19:02
2
On slave indoor receiver
Network
SIP Settings
Automatic door opener
Configuring the user interface
Maintenance
Thursday
01 Feb
Enabled Disabled
Configure Ethernet
Enabled Disabled
Configure WiFi
B
Ethernet WiFi
C
Save
Thursday
01 Feb 2018
DHCP Static
Save
Thursday
01 Feb 2018
19:02
Thursday
01 Feb
A
Info Back Home
Info Back Home
This section requires specific
knowledge of how the video in-
tercom system operates. Wrong
settings may cause partial or
even total malfunctions; that is
why the editing of some parame-
ters is allowed only after entering
the installer password; the default
password is 112233).
This section is for establishing in
which way the device connects to
the network.
A Enable/disable the types of
wanted connections
B Select whether the gateway
connection happens via the Ether-
net or WiFi network.
CEnter a valid DNS address to
have the CAMEConnect connection
(for example, 8.8.8.8.).
D Lets you choose the type of ad-
dress from:
DHCP
The device's IP address is as-
signed by the DHCP server; if
there are no special needs, this
mode lets you continue with the
settings without adding any ad-
ditional data.