• Only use this product for its intended purpose. Any other use is hazardous. Came S.p.A. is not liable for any damage caused by improper, erroneous or unreasonable use. • Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products. • Do not obstruct the ventilation or heat dissipation vents or slots.
DECOMMISSIONING AND DISPOSAL Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the material's ID marker.
Page 4
Commands and notifi cations found on the home page The appearance of the homepage may vary according to the system confi guration or the user interface. Favourites Entry panels Contacts Video Recording Aux List Call register 19:02 Thursday 01 Feb 2018 Info Back Home...
HOW TO USE THE DEVICE Answering a call Call from Entry Panel An image of the caller appears on the screen. The audio from and towards the caller is turned off . A Touch the button to answer the call and to turn on the audio communication. B Touch the button to refute the call and to return to the homepage.
Making a call This device lets you call other indoor receivers (intercommunication), any devices connected over the Wifi network or, any entry panels. Calling a contact on the favorites list Favourites Entry panels Contacts A Touch the icon to access the list of favorite contacts.
Page 7
Turn on communication to entry panel Favourites Entry panels Contacts B Touch the icon to access the list of entry panels. To fi ll the list of entry panels, see the "Contacts" chapter on page 7. Video Recording Aux List Call register 19:02 Thursday...
Page 8
Contacts Touch the icon to access the contacts list. Favourites Entry panels Contacts Video Recording Aux List Call register 19:02 Thursday 01 Feb 2018 Info Back Home The list contains all the devices that can be contacted. Concierge Main entry panel EAST entry panel Home NORTH entry panel...
Page 9
Unit A Residential unit Home B The indoor receiver. EXTENSIONS XTS receiver C Devices belonging to the residential unit. Mobile App 1 Attic XTS receiver Touch the icon to add the Mobile App 3 contact to the list of favorites. Touch one of the contacts to initiate Cellar XTS receiver a call.
Video Recording A Touch the icon the turn the answering service on or off. Favourites Entry panels Contacts To properly set up the answering service, see the "Video answering service" chapter on page 16. B The number with the red Video Recording Aux List Call register...
Aux List A Touch the icon to access the list of auxiliary contacts. Favourites Entry panels Contacts The auxiliary commands (AUX) let you activate suitably programmed contacts to carry out additional commands to the classic opening of the entry door. Video Recording Aux List Call register...
Page 12
Types of calls Incoming call. 29 Jan 2018 19:55 Entry panel Outgoing call. 28 Jan 2018 11:23 Entry panel Missed call. 07 Jan 2018 21:03 Entry panel Any missed calls are highlighted . 05 Jan 2018 14:21 Entry panel Delete all Touch the line you want to call your 03 Jan 2018 16:31 contact.
Page 13
Messages This function allows you to receive or send messages to the concierge. CCTV Messages Settings A Touch the icon to display the messages received by the concierge. 19:02 Thursday 01 Feb 2018 Info Back Home Messages from the concierge are grouped by conversation Concierge 01 Feb 2018 14:58...
Compose a new message B Touch the button to start a new conversation with the concierge. Mail delivery Subject: D Indicate the subject of the conversation. E Choose the recipient. Concierge F Proceed with the composition of the message. Continuous 19:02 Thursday 01 Feb 2018...
Page 15
Language Choose device interface language from the drop-down Language English menu. Save the setting by touching the Save button. Save 19:02 Thursday 01 Feb 2018 Info Back Home Date/time This window is for setting the date and time on the indoor receiver. Mode Manual Auto...
Page 16
Aux settings (auxiliary commands) A Touch the button to add a new auxiliary command. New Aux The list is empty Delete all 19:02 Thursday 01 Feb 2018 Info Back Home B Touch the area to assign a name to the AUX command that you are Description Gate opener going to add.
Quick commands This window is used to determine which commands are executed by Pre-set door release EAST Entrance pressing the buttons on the left side of the home page. Default concierge call Main concierge A Choose the destination of the Preset Aux command EAST stairwell light controls from the lists.
Page 18
IP cameras A Touch the button to add a new IP video camera. New video camera The list is empty Delete all 19:02 Thursday 01 Feb 2018 Info Back Home B Touch the area to assign a name Description to the IP video camera that you are going to add.
Page 19
Backdrops Select your preferred backdrop;; the new confi guration is applied Background immediately. Touch the Back button to return to the list of confi gurable parameters. 19:02 Thursday 01 Feb 2018 Info Back Home Display A Adjusts the brightness of the screen during use.
On slave receiver This section requires specifi c know-how in operating the video- Network Network intercom system. Wrong settings CAME Connect SIP Settings may cause partial or even total malfunctions; that is why the Credentials Automatic door opener editing of some parameters is Automatic door opener Confi...
Page 21
Static The device's IP address is manually assigned. E If you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of the router and of the other connected devices. F If the netmask is diff erent from the default one, provide the proper netmask. G Provide the default gateway for your network.
Page 22
K. 19:02 Thursday 01 Feb 2018 Info Back Home CAME Connect (only on master receiver) A Device's univocal code. B For enabling or disabling the VoIP remote control of the video- Keycode intercom call. Enable connection The factory settings require that the...
Serverless IP entry panel, 192.168.1.5 E Choose the type of server the device is connected. All CAME servers are of XIP Server type. Automatic mode Choosing the automatic SIP setting mode and pressing the [Save] button, a wizard is started through which it is possible to choose the server or master device, to which the device must be connected.
Page 24
B Touch the empty sections and in the pop-up window set the start Start time and fi nish time of the time-slot for activating the function. Stop time Days of the week Save Save 19:02 Thursday 01 Feb 2018 Info Back Home C Touch the days of the week...
Confi guring the user interface Using the PC software [UI Creator], it is possible to design and program a custom graphical interface within the system master server for the XTS device. A With the selected button: - If a custom graphical interface has been programmed, it will be loaded into the device. - If a custom graphical interface has not been programmed, the confi...
Maintenance (administrator password required; the default password is 112233). Reboot device A Touch the button to reboot the Restart application indoor receiver. B Touch the button to reboot only Set slave mode the application that runs the indoor Restore preset settings receiver.
Page 27
Voicemail Voicemail Help Exit With this window it is possible to System view or save on your computer the Date and Time voicemail messages of the device. View a message Network Select the message and press the appropriate button to start playback.
Page 28
CAME S.p.A. Via Martiri Della Libertà, 15 31030 Dosson di Casier - Treviso - Italy tel. (+39) 0422 4940 - fax. (+39) 0422 4941 info@came.com - www.came.com...
Need help?
Do you have a question about the XTS 7IP WH WIFI and is the answer not in the manual?
Questions and answers