Manual | Aura Panel gold matrix & dream color 1. SAFETY INSTRUCTIONS Please read these instructions carefully they include the important information about the installation usage and maintenance of this products • Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
Manual | Aura Panel gold matrix & dream color 4. How to set the unit 4.1 Rear Panel • 1 - Display: To show the various menus and the selected functions • 2 - LED: DMX input present MASTER Master Mode SLAVE Slave Mode SOUND...
Manual | Aura Panel gold matrix & dream color 4.2 Main Function To select any functions, press MENU button until the required one is shown on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode has been selected, press ENTER button to setup or it will automatically return to the main functions without any change after idling 60 seconds.
Manual | Aura Panel gold matrix & dream color DMX Address Select DMX Address, press the ENTER button to confirm, the present address will blink on the display. Use the UP and DOWN button to adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
Manual | Aura Panel gold matrix & dream color Sound State Select Sound State, press the ENTER button to confirm, present mode will blink on the display. Use the DOWN and UP button to select the On (sound on) or Off (sound off) mode. Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
Manual | Aura Panel gold matrix & dream color Fixture Time Press the MENU button up to when the Fixture Time is blinking on the display. Pressing ENTER button and the display will show the number of working hours of the unit. To go back to the functions press the MENU button again.
Manual | Aura Panel gold matrix & dream color Channel Mode Unit 1 Unit 2 Unit 3 Unit 4 4 Channel 7 Channel 13 Channel 48 Channel 43 Channel 6. DMX512 Configuration 4-CH Mode Warm white 000-107 Blackout 108-255 Show 1 - Show 8 000-255 0% - 100% Green...
Page 11
Manual | Aura Panel gold matrix & dream color 001-015 No function 2-2 (Number) 016-215 Number 0 - Number 9 216-255 To count forwards 0 up to 9 from slow to fast 000-021 No function 2-3 (letter) 022-255 Letter A - Letter Z Dimmer 000-255 0% - 100%...
Manual | Aura Panel gold matrix & dream color 000-007 No function 2-1 (line-effect) 008-247 Effect 01 - Effect 30 248-255 Random line effect 001-015 No function CH38 2-2 (Number) 016-215 Number 0 - Number 9 216-255 To count forwards 0 up to 9 from slow to fast 000-021 No function 2-3 (letter)
Manual | Aura Panel gold matrix & dream color • Connect the fixture together in a “daisy chain” by XLR plug cable from the output of the fixture to the input of the next fixture. The cable cannot be branched or split to a “Y” cable. Inadequate or damaged cables, soldered joints or corroded connectors can easily distort the signal and shut down the system.
Manual | Aura Panel gold matrix & dream color D. No response to the sound • Make sure the fixture does not receive DMX signal. • Check microphone to see if it is good by tapping the microphone. E. One of the channels is not working well •...
Need help?
Do you have a question about the Aura Panel gold matrix & dream color and is the answer not in the manual?
Questions and answers