Prepare The Appliance - Valor LX Series Installation Instructions Manual

Prepare the appliance

1. Remove the barrier, sill, and front window—see ap-
pliance's Installation Manual.
2. Turn off the gas at the shut off valve.
LX1 - Top view
Access panel
LX2 - Top view
Gas shut-off valve
3. Remove the access plate on the front panel of the
appliance (6 screws).
Access panel
4. Remove both media trays, front and rear (2
screws each for LX1, 3 screws each for LX2).
LX1 - Top view
LX2 - Top view
2
Gas shut-off valve
Access panel
Access panel removed (LX2)
5. R emove the burner (4 screws on LX1, 6 screws on
LX2).
Very carefully slide to the right and lift the burner
off . Be careful not to damage the pilot head.
LX1 - Top view
LX2 - Top view
Replace the main injector
1. Remove the air shutter (3 screws).
Air shutter