Suzuki Super Swift Owner's Manual page 90

BEFORE DRIVING
Turn the indicator selector knob
(2).
Push the indicator selector
knob (2).
NOTE:
Depending on vehicle's specifications,
some items may not be displayed.
How to use the setting mode:
1) When the ignition switch is in "ON"
position and the vehicle is stationary,
push the trip meter selector knob (1) to
switch the information display indication
(D) to the odometer.
2) Push and hold the indicator selector
knob (2) until the display shows
" ".
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the chart in
the previous page.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
2-71
EXAMPLE
68PM00272
NOTE:
• As shown in the above illustration, "
indicates on the display of currently set-
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display "
" " and then push the indicator
selector knob (2).
Time indication of clock " "
• : 12-hour format (default set-
ting)
• : 24-hour format
Central door locking system " "
• : Unlock all doors by turning
the key once
• : Unlock all doors by turning
the key twice (default setting)
Additional flashes of the turn signal
" "
• : Turn signal flashes
times after the turn signal
lever is returned (default set-
ting)
• : Disable the additional flashes
of turn signal
Lighting time of the "To car" function
" "
• : Disable the "To car" function
• : 10 seconds (default setting)
• : 15 seconds
• : 20 seconds
• : 25 seconds
"
Lighting time of the "To home" function
" "
• : Disable the "To home" func-
tion
" or
• : 10 seconds (default setting)
• : 15 seconds
• : 20 seconds
• : 25 seconds
• : 30 seconds
Oil change request light reset setting
" "
• : Reset of the oil life monitoring
system
Tire pressure monitoring system set-
ting
(For EU countries)
• : Comfort Mode (default set-
ting)
• : Load Mode
three
52RM0-01E