Suzuki Super Swift Owner's Manual page 397

Hide thumbs Also See for Super Swift:

Table of Contents

Oil filter replacement

1) Using an oil filter wrench, turn the oil fil-

ter counterclockwise and remove it.

2) Using a clean rag, wipe off the mount-

ing surface on the engine where the

new filter will be seated.

3) Smear a small amount of engine oil

around the rubber gasket of the new oil

4) Screw the new filter by hand until the fil-

ter gasket contacts the mounting sur-

Tightening (viewed from filter top)

(1) Oil filter

(2) 3/4 turn

To tighten the oil filter properly, it is

important to accurately identify the

position at which the filter gasket

first contacts the mounting surface.

INSPECTION AND MAINTENANCE

5) Tighten the filter as specified below

from the point of contact with the

mounting surface (or to the specified

torque) using an oil filter wrench.

Tightening torque for oil filter:

14 Nm (1.4 kg-m, 10.3 lb-ft)

To prevent oil leakage, check that the

oil filter is tight, but do not over-

Show Quick Links

Chapters

Table of Contents