Suzuki Super Swift Owner's Manual page 121

Selector position (for automatic
transaxle or CVT vehicles) / Gear-
shift indicator (if equipped)
EXAMPLE
(j)
68PM00255
Selector position (for automatic tran-
saxle or CVT vehicles)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to "ON", the dis-
play (D) indicates the gear position (j).
For details on how to use the transaxle,
refer to "Using transaxle" in "OPERATING
YOUR VEHICLE" section.
Gearshift indicator (if equipped)
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
trip meter selector knob (2) for about 2
seconds when the display shows the trip
meter.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
BEFORE DRIVING
Setting mode
When the ignition switch is in "ON" position
or the ignition mode is "ON" and the vehi-
cle is stationary, you can enter into the set-
ting mode of the information display by
pushing and holding the indicator selector
knob (2) for more than 3 seconds.
• To select the setting item that you want
to change, turn the indicator selector
knob (2) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
EXAMPLE
52RM21150
NOTE:
The currently selected setting item is sur-
rounded by a frame.
2-102
52RM0-01E