Suzuki Super Swift Owner's Manual page 100

BEFORE DRIVING
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
trip meter selector knob (2) for a while.
NOTE:
The indicated maximum value of the trip
meter is 9999.9. When you run past the
maximum value, the indicated value will
return to 0.0.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
2-81
Idling stop time and idling stop fuel
saved
EXAMPLE
52RM20900
When the engine is stopped automatically
by ENG A-STOP system, the display (C)
will show the length (in hours, minutes and
seconds) of engine stopping time and the
amount of fuel saved by idling stop. After
the engine is restarted, the display will be
switched to original indication.
Setting mode
When the ignition switch is in "ON" position
and the vehicle is stationary, you can enter
the setting mode of the information display
by pushing and holding the indicator selec-
tor knob (3) for more than 3 seconds.
• To select the setting that you want to
change, turn the indicator selector knob
(3) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
EXAMPLE
52RM20910
NOTE:
The currently selected setting item is sur-
rounded by a frame.
52RM0-01E