Keys - Suzuki Super Swift Owner's Manual

BEFORE DRIVING

Keys

EXAMPLE
Your vehicle comes with a pair of identical
keys. Keep one of the keys as a spare key
in a safe place. One key can open all of the
locks on the vehicle.
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag in a safe place. If
you lose your keys, you will need this num-
ber to have new keys made. Write the
number below for your future reference.
KEY NUMBER:
2-1
Immobilizer system
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle's original immobilizer ignition key
or keyless push start system remote con-
troller, which has an electronic identifica-
tion code programmed in it. The key or
remote controller communicates the identi-
fication code to the vehicle when the igni-
tion switch is turned to "ON" position or the
engine switch is pressed to change the
ignition mode to "ON". If you need to make
spare keys or remote controllers, see an
authorized SUZUKI dealer. The vehicle
must be programmed with the correct iden-
54G489
tification code for the spare. A key made
by an ordinary locksmith will not work.
If the immobilizer/keyless push start sys-
tem warning light blinks when the ignition
switch is in "ON" position or the ignition
mode is "ON", the engine will not start.
NOTE:
If the immobilizer/keyless push start sys-
tem warning light blinks or comes on, a
message may be shown on the information
display.
For vehicles without a keyless push
start system
If this light blinks, turn the ignition switch to
"LOCK" position, and then turn it back to
"ON" position.
If the light still blinks after the ignition
switch is turned back to "ON" position,
there may be something wrong with your
key or with the immobilizer system. Ask an
authorized SUZUKI dealer to have the sys-
tem inspected.
For vehicles with a keyless push start
system
If this light blinks, change the ignition mode
to "LOCK" (OFF), and then change it back
to "ON". Also refer to "If the master warn-
ing indicator light blinks and the engine
cannot be started" in "Starting engine
(vehicle with keyless push start system) (if
equipped)" in "OPERATING YOUR VEHI-
CLE" section.
80JM122
If the light still blinks after the ignition mode
is changed back to "ON", there may be
something wrong with your key or with the
immobilizer system. Ask an authorized
SUZUKI dealer to have the system
inspected.
52RM0-01E