Suzuki Super Swift Owner's Manual page 190

OPERATING YOUR VEHICLE
6-Speed automatic transaxle
Gearshift lever
52RM30250
The gearshift lever is designed so that it
cannot be shifted out of "P" position unless
the ignition switch is in "ON" position or the
ignition mode is "ON" and the brake pedal
is depressed.
Use the gearshift lever positions as fol-
lows:
P (Park)
Use this position to lock the transaxle
when the vehicle is parked or when start-
ing the engine. Shift into Park only when
the vehicle is completely stationary.
R (Reverse)
Use this position to reverse the vehicle
from stop. Make sure that vehicle is com-
3-19
pletely stationary before shifting into
Reverse.
N (Neutral)
Use this position for starting the engine if
the engine stalls and you need to restart it
while the vehicle is moving. You may also
shift into Neutral and depress the brake
pedal to hold the vehicle stationary during
idling.
D (Drive)
Use this position for all normal driving.
With the gearshift lever in "D" range you
can get an automatic downshift by press-
ing the accelerator pedal. The higher the
vehicle speed is, the more you need to
press the accelerator pedal to get a down-
shift.
M (manual mode)
Use this position for driving in the manual
mode.
Refer to "Manual mode" later in this section
for details on how to use the manual mode.
WARNING
Always depress the brake pedal
before shifting from "P" (Park) (or
"N" (Neutral) if the vehicle is station-
ary) to a forward or reverse gear, to
help prevent the vehicle from moving
unexpectedly when you shift.
The gearshift lever has a lock mechanism
to help prevent accidental shifting. Shift the
gearshift lever as follows:
EXAMPLE
(1)
52RM30260
(1) knob button
Shift with the knob button (1)
pushed in and the brake pedal
depressed.
Shift with the knob button (1)
pushed in.
Shift without the knob button (1)
pushed in.
52RM0-01E