Keyless Push Start System (If Equipped) - Suzuki Super Swift Owner's Manual

OPERATING YOUR VEHICLE
Keyless push start system
(if equipped)
Provided the keyless push start system
remote controller is within the interior work-
able area (refer to the related explanation
in this section), you can use the engine
switch for starting the engine and selecting
an ignition mode ("ACC" or "ON"). In addi-
tion, the following functions can be used:
• Keyless entry function. Refer to "Keyless
push start system remote controller /
keyless entry system transmitter (if
equipped)" in "BEFORE DRIVING" sec-
tion for details.
• Locking and unlocking doors (including
the tailgate) using a request switch.
Refer to "Keyless push start system
remote controller / keyless entry system
transmitter (if equipped)" in "BEFORE
DRIVING" section for details.
• Immobilizer (anti-theft) function. Refer to
"Immobilizer system" in "BEFORE DRIV-
ING" section for details.
Engine switch illumination
The engine switch is illuminated (lit) in the
following situations:
• When the engine is off and the driver's
door is open, or for 15 seconds after the
driver's door is closed. The illumination
will fade out after 15 seconds passed.
3-7
• When the engine is off and the position
lights are on. The illumination will go out
when the position lights are turned off.
• When the engine is on and the position
lights and/or the headlights are on. The
illumination will go out when the position
lights and/or the headlights are turned
off.
NOTE:
To save the lead-acid battery, the illumina-
tion will be automatically turned off when
both of the following conditions are simul-
taneously met:
• The headlights and position lights are
turned off.
• 15 minutes has elapsed since opening
the driver's door.
Selection of ignition modes
Press the engine switch to select "ACC" or
"ON" mode as follows when you use an
electric accessory or check the operation
of instruments without running the engine.
1) Bring the keyless push start system
remote controller with you and sit in the
driver's seat.
2) Manual transaxle – Without depressing
the clutch pedal, press the engine
switch (1).
Automatic transaxle or CVT – Without
depressing the brake pedal, press the
engine switch (1).
82K253
(1)
82K254
52RM0-01E