Keys - Suzuki Ciaz Owner's Manual

BEFORE DRIVING

Keys

EXAMPLE
Your vehicle comes with a pair of keys.
The key(s) may or may not be equipped
with a transmitter depending on model
variant. Keep the spare key in a safe
place. One key can open all of the locks on
the vehicle.
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag (if equipped) in a
safe place. If you lose your keys, you will
need this number to have new keys made.
Write the number below for your future ref-
erence.
KEY NUMBER:
2-1
Immobilizer System
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle's original immobilizer ignition key
or keyless push start system remote con-
troller which has an electronic identification
code programmed into it. The key or
remote controller communicates the identi-
fication code to the vehicle when the igni-
tion switch is turned to the "ON" position or
the engine switch is pressed to change the
ignition mode to "ON". If you need to make
54G489
spare keys or remote controllers, see your
authorised Maruti Suzuki workshop. The
vehicle must be programmed with the cor-
rect identification code for the spare. A key
made by an ordinary locksmith will not
work.
If the immobilizer/keyless push start sys-
tem warning light blinks when the ignition
switch is in the "ON" position or the ignition
mode is "ON", the engine will not start.
NOTICE
Do not modify or remove the immobi-
lizer system. If modified or removed,
the system cannot be operated prop-
erly.
This immobilizer system is maintenance-
free.
For vehicles without keyless push start
system
If this light blinks, turn the ignition switch to
the "LOCK" position, then turn it back to
the "ON" position.
If the light still blinks after the ignition
switch is turned back to the "ON" position,
there may be something wrong with your
key or with the immobilizer system. Ask
your authorised Maruti Suzuki workshop to
have the system inspected.
For vehicles with keyless push start
system
If this light blinks, change the ignition mode
to "LOCK" (OFF), then change back to
80JM122
"ON". Also refer to "If the master warning
indicator light blinks and the engine cannot
be started" in "Starting the Engine (Vehicle
with Keyless Push Start System)" in the
"OPERATING YOUR VEHICLE" section.
If the light still blinks after the ignition mode
is changed back to "ON", there may be
something wrong with your key or with the
immobilizer system. Ask your authorised
79MH0-74E