Table of Contents
Advertisement
DTH7500_en
4/07/03
Connections and initial set up
Manual channel search
If you want to set up a new channel, use the manual search procedure which will enable you to
add a channel to the ones already set-up on your DMR.The channels already stored will not be
deleted. During the initial installation, if you carried out the automatic installation described on
page 6, you do not need to carry out the steps shown on 8 and 9.
1.
If the main menu is not displayed, press the
2.
Select the Setup line using the
3.
Select the Installation line using the
4.
Select the Manual Search line using the
5.
Select your country of residence using the
and press
OK
A set-up window will appear.The Standard line is highlighted.
6.
Select your country's TV standard using the
7.
Select the Reception line using the
of antenna.
•
Reception through external antenna: select Antenna (Ch).
•
Cable reception: select Cable (Ca).
8.
Select the Channel line using the
9.
Press
PR+
to start the manual search.
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.: Ch 06).
If the channel is encoded, press
this case, plug a decoder into the blue AV2 socket of the DMR.
If the picture is poor, select Fine Tuning using
10.
When you have got the correct image and sound on the channel, select the line Save with
the
and
on the remote control. Press
The Channel line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press
16:55
Page 8
and
.
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL') for France,
EURO BG (BGH) for Western Europe.
DKK' for Eastern Europe.
I for the United Kingdom.
and
to display the pictogram
AV
keys, and allocate a channel number with
to store the number that you have assigned to the channel.
OK
key.
MENU
keys, and press
to validate.
OK
and
keys, and press
OK
and
keys, and press
and
keys on the remote control,
key.
and
keys, and use the
keys.
next to the channel number. In
and
and adjust with
PR+
or
PR-
to exit the manual set-up.
MENU
8
to validate.
to validate.
OK
key to choose the type
PR+
or
PR-
.
or the numbered keys
Advertisement
Table of Contents
