Table of Contents
Advertisement
DTH7500_en
4/07/03
Connections and initial set up
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DMR cannot be factory-set
to receive the TV channels of your area.You will have to set up the channels by following the
automatic procedure recommended below.
Note:Your DMR is equipped with the AV Link. function.This function simplifies channel set-up by
downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is
already set up. The channels downloaded in this way keep the same characteristics as those of your TV set
(same number, name, etc.).Your DMR's AV Link downloading function is enabled (factory setting). If you wish
to de-activate this function, see page 49.
16:55
Page 6
6.
Select your country of residence using the
keys, and press
Note: The screen only displays 3 countries at one time. The
arrows above and below indicate other possible countries.
Scroll through the list of countries with the
On the screen that is displayed, the Automatic option is
already selected. Press
The screen displayed is a set-up screen for the allocation of
input terminals.
7.
If you connected your devices as indicated on page 3,
check that
Antenna-Cable
using the
other selections (AV2, AV3, AV4) leave them allocated
to Nothing and continue to step 8.
Note: Other terminal settings (set with the
The AV2-SAT -CABL connection is intended for a satellite or
cable receiver.The installation of a satellite or cable receiver is
explained on page 10.
AV3-Front and AV4 correspond to the IN or INPUT inputs
of a device supplying Composite Video signals (CVBS) or S-Video.
The Other option is for connection of another device (video
recorder...).
Nothing: If no device is connected to the socket concerned.
8.
Then select the
press
An installation window will appear. A cursor shows the
progress in the set-up of the channels.You will need to
wait a fair amount of time.When all the channels that you
can receive in your area have been stored, 100 % is
indicated.The number of channels found is indicated by
XX channels found.
Press
OK
OK
.
.
OK
Antenna-Cable
has been allocated to
, otherwise change the allocation
key on the remote control. For the
Done
line with the
OK
.
.
6
or
and
keys .
/
keys).
key, and
Advertisement
Table of Contents
