Table of Contents
Advertisement
Connections and initial set up
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DVD recorder cannot be
factory-set to receive the TV channels of your area.You will have to set up the channels by
following the automatic procedure recommended below.
DTH 8045: Your DVD recorder is equipped with the AV Link. function. This function simplifies channel set-
up by downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.)
which is already set up. The channels downloaded in this way keep the same characteristics as those of your
TV set (same number, name, etc.).Your DVD recorder's AV Link downloading function is enabled (factory
setting). When first turning on the DVD recorder, if the television is turned on, it will download the channels
already installed in your television set. If you wish to de-activate this function, see page 65.
6.
Select your country of residence using the
keys, and press
OK
Note: the arrows indicate that other countries are available.
To find your country, use the
control.
7.
On the screen that is displayed, the Automatic
option is already selected. Press
8.
If you connected your devices as indicated on page 4,
check that
Antenna-Cable
Antenna-Cable
using the
key on the remote control. For the
other selections (AV2, AV3, AV4) leave them allocated
to Nothing and continue to step 8.
Note: Other terminal settings (set with the
keys).
The AV2-SAT -CABL connection is intended for a satellite or
cable receiver.The installation of a satellite or cable receiver is
explained on page 9.
AV3-Front and AV4 correspond to the IN or INPUT inputs
of a device supplying Composite Video signals (CVBS) or S-Video.
The Other option is for connection of another device (video
recorder...).
Nothing: If no device is connected to the socket concerned.
9.
Done
Then select the
press
.
OK
10.
An installation window will appear. A cursor shows
the progress in the set-up of the channels.You will
need to wait a fair amount of time.When all the
channels that you can receive in your area have been
stored, 100 % is indicated.The number of channels
found is indicated by XX channels found.
Press
.
OK
6
.
buttons on your remote
.
OK
has been allocated to
, otherwise change the allocation
line with the
Continue on the next page ...
or
/
key, and
Advertisement
Table of Contents
