Table of Contents
Advertisement
DTH7500_en
4/07/03
The disc information banner
Arrow
up
Arrow
left
Arrow
down
16:56
Page 35
To access the information banner, press
OK
control unit during playback. Use arrow keys
remote control unit to select the various icons.When an icon is
selected it is highlighted.The line under the banner is an
Arrow
information and instruction line.When small arrows appear
right
above and below the selected icon these point to other
possible options. Now use the
through the various options.
INFO
Timer (DVD,VCD, CD)
This icon shows the time elapsed since the start of playback.The time
displayed is that of the title of a DVD disc during playback.The timer provides
direct access to a scene or a musical passage by keying in the starting time.
Select the time elapsed icon and use the numbered keys on the remote
control unit to access the place from which you want to play back. Use
two digits for each field. For instance, if you enter 01:35:12, you will
access the sequence beginning 1 hour, 35 minutes and 12 seconds after
the start of the title.
Note: for audio VCDs, the timer refers to the track currently being played.
Title or Track (DVD,VCD, CD)
Most DVD discs only contain one title. However some discs may contain
several titles each of which is itself divided into several chapters.
To choose a title, select icon T then use the
the titles or tracks. Use the numbered keys on the remote control unit
to access a particular title or track.
Chapter (DVD)
Most DVD discs contain several chapters.
To choose a chapter, select icon C then use the
chapters. Use the numbered keys on the remote control unit to access a
particular chapter.
Note: follow your progress below the banner.
Playing a disc
and
and
35
on your remote
INFO
and
on the
EN
keys to scroll
keys to scroll
and
keys to scroll
EN
Advertisement
Table of Contents
