Table of Contents
Advertisement
DTH7500_en
4/07/03
Channel update
If new channels make their way into the audiovisual scene, you will have to update your DMR's list
of channels. In such a case, start a new channel search from the installation menu.This set-up
deletes all stored channels and resets all the channels that your DMR can receive. If you only
want to set-up a single channel, refer to the manual search on page 8.
1.
If the main menu is not displayed, press the
2.
Select the Setup line using the
3.
Select the Installation line using the
4.
Select the Channel search line using the
Time set
Your DMR has an automatic time setting system which recognises the time signals put out by
certain channels. If your DMR is not set at the right time, you can reset it by following the
instructions below:
1.
If the Main Menu is not displayed, press the
2.
Select the Setup line using the
3.
Select the Installation line using the
4.
Select the Manual Clock line using the
Sorting the channels
1.
If the Main Menu is not displayed, press the
2.
Select the Setup line using the
3.
Select the Installation line using the
4.
Select the Channel List line using the
Refer to the Sorting the channels paragraph on page 7 to check or sort out the channels
stored on your DMR.
16:55
Page 9
Connections and initial set up
and
An installation window will appear. A cursor shows the
progress in the set-up of the channels.When all the
channels that you can receive in your area have been
stored,
Channel search
Main Menu.
and
5.
Year is highlighted. Enter the year's 4 digits
(press 2
6.
Then enter the 4 digits of the date
(press 1
7.
Enter the 4 digits of the time
(press 1
8.
Press
or
key.
MENU
keys, and press
to validate.
OK
and
keys, and press
OK
and
keys, and press
is indicated. Press
100 %
line. Press
MENU
key.
MENU
keys, and press
to validate.
OK
and
keys, and press
OK
and
keys, and press
0
0
3 for 2003).
,
,
,
2
0
5 for 12th May).
,
,
,
5
5
9 for 15:59 (03:59 PM).
,
,
,
to confirm
OK
key.
MENU
keys, and press
to validate.
OK
or
keys, and press
OK
or
keys, and press
OK
9
to validate.
OK
to validate.
to return to the
OK
to return to the
to validate.
to validate.
OK
to validate.
to validate.
EN
EN
Advertisement
Table of Contents
