Manual Channel Search - THOMSON DTH8000 Owner's Manual

DTH8000_en(EB-UB)

Manual channel search

If you want to set up a new channel, use the manual search procedure which will enable you to
add a channel to the ones already set-up on your DTH 8000.The channels already stored will not
be deleted. During the initial installation, if you carried out the automatic installation described on
page 5, you do not need to carry out the steps shown on 7 and 8.
1.
If the main menu is not displayed, press the
2. Select the Setup line using the
3.
Select the Installation line using the
4. Select the Manual Search line using the
5.
Select your country of residence using the
OK .
A set-up window will appear.The Standard line is highlighted.
6. Select your country's TV standard using the
7.
Select the Reception line using the
of antenna.
• Reception through external antenna: select Antenna (Ch).
• Cable reception: select Cable (Ca).
8.
Select the Channel line using the
9. Press
PR+
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.: Ch 06).
If the channel is encoded, press
this case, plug a decoder into the blue AV2 connector of the DTH 8000.
If the picture is poor, select Fine Tuning using
10.
When the picture and sound of the channel are good, select the line Save using
and assign a channel number with
number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press
18/12/03 14:48 Page 7
Connections and initial set up
or
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL') for France,
EURO BG (BGH) for Western Europe.
DKK' for Eastern Europe.
I for the United Kingdom.
to start the Manual search.
to display the pictogram
AV
PR+
key.
MENU
keys, and press to validate.
OK
or keys, and press OK
or keys, and press
or keys on the remote control, and press
key.
or keys, and use the
or keys.
next to the channel number. In
or and adjust with
or or the keys. Press
PR- number
to exit the manual set-up.
MENU
7
to validate.
to validate.
OK
key to choose the type
PR+ or PR- .
or ,
to store the
OK
EN
EN