Table of Contents
Advertisement
DTH7500_en
4/07/03
Recording functions
Programming a TV recording
You can record a future programme by programming its recording time. For this you have the
choice of manual programming or Naviclick programming, explained on page 26.
Recording with the timer
1.
From the main menu (
and then
• The Timers screen is displayed. It contains a list of all the deferred recordings that you
have already programmed, whether carried out manually, as explained below, or using the
Naviclick function explained on page 26. If nothing has been programmed the screen
simply displays New.
2.
Press the
OK
• The programming menu is displayed.This menu allows you to define all the parameters
necessary for a deferred recording. Select each parameter with the
the corresponding information with the number keys or the
3.
Name
Give a Name to your programme. Press the
keys
,
,
complete, select Keep
4.
Channel
a) Enter the channel number using the digit keys of the remote control (Pr -- must be displayed)
or browse the list of channels in the memory of the DMR using the
b) Or select one of the Audio-Video (AV2,AV3,AV4) sockets to which is connected a device
(satellite receiver or other) using the
5.
Day (s)
Using the digit keys on the remote control type in the date, if the recording is not made the
same day, and / or select a period using the
Once: to record the selected programme according to the parameters you have defined.
Every Mon: to record the same programme the same day every week starting from today (supposing
today is Monday).
Mon-Fri: to record the same programme, everyday at the same time from Monday to Friday.
6.
Start time and stop time
Enter the recording start time and then the stop time.
16:55
Page 24
MENU
key in stop mode) select the Recording then Timer option
or
keys and
.
OK
key.
Note: your DMR has a programming monitoring system.You can
schedule up to 16 recordings. If the programming of two
recordings overlaps, a warning message will be displayed.
,
and
OK
to compose the title of the recording letter by letter.When
with
and press OK
key as described below.
key to access the keyboard table. Use the
INFO
.
key (the socket details are shown on page 17).
key.
24
and
key and enter
key.
PR+/PR-
Advertisement
Table of Contents
