Sorting The Channels; Clock Setting - THOMSON DTH7500 User Manual

Digital media recorder
Table of Contents

Advertisement

DTH7500_en
4/07/03

Sorting the channels

9.
A channel sorting window will appear.The picture of the selected channel is shown in the
background.
The automatic channel search has assigned numbers to the channels is a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
10.
When all channels have been sorted to your liking, press the
Your DMR has an automatic time (and date) setting function. In general, no setting is required on
your part.
11.
If the time and date information is correct, press twice on
displayed: the installation of the channels is now complete.

Clock setting

AutoClock: If the date and time information is not correct, adjust the clock as described below,
then check in the Installation menu that the automatic time setting is activated.This menu is
reached from the Setup menu (see page 49). Setting the time and date on the DMR is important
for the proper operation when recording programmes and for optimum downloading of the
programmes guide NAVICLICK.
Note:You can now use your DMR and take advantage of its numerous functions. If you want to connect a
satellite receiver to your DMR refer to page 10 for the recommended connection.You can also complete your
installation through the settings available in the Options menu (refer to pages 48-49).These adjustments
depend on the other devices that you are likely to connect to your DMR.
If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).
16:55
Page 7
Connections and initial set up
Note: Channel sorting instructions:
Move: press
desired position (Pr no. on the left of the list then
of the 2 channels).
Delete:
Rename:
the list. Validate by pressing
Decoder set-up:
1.
Select Year. Enter 4 digits for the year
(2, 0, 0, 3 for 2003).
2.
Then enter the 4 digits of the date
(press 1
3.
Enter the 4 digits of the time
(press 1
4.
Then press twice on
again. Channel set-up is complete.
OK
(then the
and
CLEAR
key.
keys, then
and
INFO
.
OK
(key (displays a symbol in the list of channels).
AV
key.
OK
.The Main Menu of the DMR is
2
0
5 for 12th May).
,
,
,
5
5
9 for 15:59 (03:59 PM).
,
,
,
The Main Menu will appear
OK.
7
keys until you reach the
: swapping
OK
to search for a name on
EN
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dth7500e

Table of Contents