Table of Contents
Advertisement
Sorting the channels
11.
A window for classifying the channels appears with the images of the selected channel.
The automatic channel search has assigned numbers to the channels is a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
12.
When all channels have been sorted to your liking, press the
13.
Your DVD recorder has an automatic time (and date) setting function. In general, no setting is
required on your part. If the time and date information are correct, press
appears. It indicates that the installation of the channels are now complete. Press
main menu of your DVD recorder appears.
Clock setting
AutoClock:
If the time and date are incorrect, adjust the clock as described below, check that
automatic time updating is activated.The time setting of the DVD recorder is important for the
correct functioning of your programmed recordings.
Note:You can now use your DVD recorder and take advantage of its numerous functions. If you want to
connect a satellite receiver to your DVD recorder, refer to page 14 for the recommended connection.You can
also complete your installation through the settings available in the System Options menu (refer to
pages 64-65). These adjustments depend on the other devices that you are likely to connect to your DVD
recorder.
If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).
Connections and initial set up
Note: Channel sorting instructions:
Move: press
(then the
OK
the desired position (Pr no. on the left of the list then
swapping of the 2 channels).
Delete:
key.
CLEAR
Rename:
keys, then
INFO
list. Validate by pressing
Decoder adjustment:
selected channel will be decrypted by a decoder, of the
C
+ type, connected to connector
ANAL
decoder displayed alongside the name of the channel confirms
the adjustment).
1. Select Year. Enter 4 digits for the year
(2, 0, 0, 5 for 2005).
2.
Then enter the 4 digits of the date
(press 1
,
5
,
0
,
5 for 15th May).
3.
Enter the 4 digits of the time
(press 1
,
5
,
5
,
9 for 15:59 (03:59 PM).
4.
Then press twice on
again. Channel set-up is complete.
7
/
/
/
keys until you reach
/
to search for a name on the
OK
.
key (indicates that the images of the
AV
. The symbol of a
AV2
key.
STOP
. A message
OK
The Main Menu will appear
OK.
EN
EN
:
OK
.The
OK
Advertisement
Table of Contents
