Sorting The Channels; Clock Setting - THOMSON DTH8000 Owner's Manual

Thomson multimedia dvd player owner manual
Table of Contents

Advertisement

DTH8000_en(EB-UB)
Connections and initial set up

Sorting the channels

9.
A channel sorting window will appear.The picture of the selected channel is shown in the
background.
The automatic channel search has assigned numbers to the channels is a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
10.
When all channels have been sorted to your liking, press the
Your DTH 8000 has an automatic time (and date) setting function. In general, no setting is
required on your part.
11.
If the time and date information is correct, press twice on
DTH 8000 is displayed: the installation of the channels is now complete.

Clock setting

AutoClock: If the date and time information is not correct, adjust the clock as described below,
then check in the System Options menu that the automatic time setting is activated.This menu
is reached from the Setup menu (see page 51). Setting the time and date on the DTH 8000 is
important for the proper operation when recording programmes and for optimum downloading
of the programmes guide NAVICLICK.
Note:You can now use your DTH 8000 and take advantage of its numerous functions. If you want to
connect a satellite receiver to your DTH 8000, refer to page 9 for the recommended connection.You can
also complete your installation through the settings available in the System Options menu (refer to
pages 50-51). These adjustments depend on the other devices that you are likely to connect to your
DTH 8000.
If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).
18/12/03
14:48
Page 6
Note: Channel sorting instructions:
Move: press
desired position (Pr no. on the left of the list then
of the 2 channels).
Delete:
Rename:
list. Validate by pressing
Decoder set-up:
channels).
1.
Select Year. Enter 4 digits for the year
(2, 0, 0, 3 for 2003).
2.
Then enter the 4 digits of the date
(press 1
3.
Enter the 4 digits of the time
(press 1
4.
Then press twice on
again. Channel set-up is complete.
OK
(then the
/
keys until you reach the
key.
CLEAR
keys, then
/
to search for a name on the
INFO
.
OK
AV
(key (displays a symbol in the list of
key.
.The Main Menu of the
OK
,
5
,
0
,
5 for 15th May).
5
5
9 for 15:59 (03:59 PM).
,
,
,
OK.
The Main Menu will appear
6
OK
: swapping

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dth8000ebDth8000ubDth8000e

Table of Contents