Advertisement
Quick Links
BT899XL-FD
FIXED DROP PROJECTOR CEILING MOUNT
WITH MICRO-ADJUSTMENT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
Registered Design Nºs: 001713306-0004 / 002741256-0008
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Product Dimensions..........................................................................................................................15
B-Tech Contact Details.....................................................................................................................16
INSTALLATION TOOLS REQUIRED
13mm
spanner or socket
FEATURES
Ceiling mount designed for projectors up to 25kg (55lbs)
+/-13° tilt adjustment, +/-6° roll adjustment and 360° swivel
Optional micro-adjustment for perfect alignment of projected images
Unique 'Carousel' mounting plate for universal compatibility
Maximum distance between any two fixing points 493mm
Suitable for angled/cathedral ceilings
Includes Ø50mm extension pole
Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
Theft deterrent security screws provided as standard
(excludes M2.5 and M3 fixings)
Integrated cable management for a smart installation
All mounting hardware & fixings included
25kg
CONTENTS
Drill
Crosshead
screwdriver
B-TECH AV MOUNTS
www.btechavmounts.com
10mm masonry bit
or 6mm wood bit
360°
Pencil
Advertisement
Related Manuals for B-Tech BT899XL-FD
Summary of Contents for B-Tech BT899XL-FD
-
Page 1: Table Of Contents
All mounting hardware & fixings included 25kg 360° Registered Design Nºs: 001713306-0004 / 002741256-0008 CONTENTS Installation Safety Notes........................2 Parts List.............................4 Installation Instructions........................6 Product Dimensions..........................15 B-Tech Contact Details........................16 INSTALLATION TOOLS REQUIRED Pencil Drill 13mm Crosshead 10mm masonry bit screwdriver or 6mm wood bit... -
Page 4: Parts List
BT899XL-FD PARTS LIST Micro-adjustment assembled Suitable for loads up to 25kg... - Page 5 ITEM PART NAME CEILING PLATE Ø50mm COLLAR M8 x 12mm SCREW M8 WASHER M8 LOCK WASHER M8 x 65mm SAFETY BOLT M8 SPRING WASHER EXTENSION POLE POLE ADAPTOR MOUNTING PLATE LONG LEG SHORT LEG MOUNTING SCREW M8 x 16mm HEX SCREW M8 T2mm PLASTIC WASHER INTERFACE KIT ITEM...
-
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Assemble Pole to Collar i. Slide item 2 onto item 8. Ø50mm POLE ii. Fix item 2 to item 8 using items 6 and 7. iii. Tighten the grub screws evenly on item 2 using item 33. GRUB SCREW... - Page 7 Mount Pole and Collar to Ceiling Plate Set the required tilt angle when fitting item 2 to item 1, using items 3, 4 & 5. Tighten with item 34. The tilt angle can also be adjusted once mounted to the ceiling or wall...
- Page 8 15 IMPORTANT B-Tech highly recommends this product be installed by a suitably qualified person. The installer must be satisfied that the types of fixings used are suitable for the type of ceiling the product is to be mounted to.
- Page 9 iv. Assemble the remaining two fixings to secure the ceiling plate.
- Page 10 Attach Mounting Plate to Pole Connect item 8 to item 10 using item 9.
- Page 11 Attach Interface Assembly to Projector Loosen part 20, adjust legs then re-tighten. MOUNTING HOLE SHORT LEG ASSEMBLY Unfasten and remove parts 20 & 21 and replace part 14 with part 15...
- Page 12 Optional Micro-Adjustment For a precise post-installation alignment of the tilt or roll, the micro-adjustment can be installed as shown. If the micro-adjustment is not required proceed to Step 7. i. Roll micro-adjustment ii. Tilt micro-adjustment...
- Page 13 Hook Projector onto Ceiling Mount Connect item 11 to item 10 using items 22.
- Page 14 Adjusting the Projector i. To tilt/roll, loosen items 22, adjust and re-tighten. + / - 13º pitch + / - 6 º roll ii. Micro-adjustment (if installed). Loosen item 22 (M6 x 12mm screws) by one turn using item 34. Micro adjust item 26 (M4 x 30mm screws) using item 34 to roll or tilt the projector.
-
Page 15: Product Dimensions
SHORT LEG LONG LEG ASSEMBLY ASSEMBLY 20mm 6.2mm 43.5mm 6.5mm 263.5mm (max.) 283.5mm 143.5mm 318.5mm 493.5mm (max.) 521.5mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT. -
Page 16: B-Tech Contact Details
B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd. B-Tech, Better By Design, System 2 and Pro Install are registered trademarks of B-Tech International Design & Manufacturing Ltd. All other brands and product names are trademarks of their respective owners.