Advertisement
Quick Links
BT899XL-AD
ADJUSTABLE DROP EXTRA-LARGE PROJECTOR
CEILING MOUNT WITH MICRO-ADJUSTMENT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Product Dimensions..........................................................................................................................11
B-Tech Contact Details.....................................................................................................................12
INSTALLATION TOOLS REQUIRED
13mm
spanner or socket
FEATURES
Telescopic ceiling mount designed for projectors up to 25kg (55lbs)
Adjustable drop: 728mm to 1128mm (in 25mm increments)
+/-13° tilt adjustment, +/-6° roll adjustment and 360° swivel
Maximum distance between any two fixing points
on projector : 493mm (19.4")
Optional micro-adjustment for short throw projectors
Unique 'Carousel' mounting plate for universal compatibility
Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
Integrated cable management for a smart installation
All mounting hardware & fixings included
25kg
CONTENTS
Drill
Crosshead
screwdriver
B-TECH AV MOUNTS
www.btechavmounts.com
10mm masonry bit
or 6mm wood bit
360°
Pencil
Advertisement
Related Manuals for B-Tech BT899XL-AD
Summary of Contents for B-Tech BT899XL-AD
- Page 1 Integrated cable management for a smart installation All mounting hardware & fixings included 25kg 360° CONTENTS Installation Safety Notes........................2 Parts List.............................4 Installation Instructions........................6 Product Dimensions..........................11 B-Tech Contact Details........................12 INSTALLATION TOOLS REQUIRED Pencil Drill 13mm Crosshead 10mm masonry bit screwdriver or 6mm wood bit...
- Page 4 BT899XL-AD PARTS LIST Suitable for loads up to 25kg...
- Page 5 ITEM PART NAME TELESCOPIC CELING PLATE COVER PLATE (HALF) M8 x 6mm GRUB SCREW POLE ADAPTOR MOUNTING PLATE JOINING PLATE SWIVEL PLATE CAROUSEL PLATE LONG LEG SHORT LEG MOUNTING SCREW M8 x 16mm HEX SCREW M8 T2mm PLASTIC WASHER M8 NYLOC NUT M6 x 8mm SCREW M6 T1mm METAL WASHER M6 x 12mm PIN HEX SCREW...
- Page 6 Attach Ceiling Pole Mount to Ceiling i. Fix item 1 to the ceiling. ii. Attach item 2 to item 1.
- Page 7 Adjust Ceiling Drop to Desired Height i. Push spring button to ii. Move inner sliding pole iii. When desired ceiling drop is release height adjustment. to desired ceiling drop. reached, ensure spring button protrudes from hole. Push spring button in Spring Button must protrude fully from hole...
- Page 8 Attach Pole Adaptor Mount to Ceiling Pole Mount Connect item 5 to item 1 using item 4. Optional Micro-adjustment For short throw projectors the micro-adjustment can be installed as shown. If the micro-adjustment is not required proceed to Step 6. Tilt Micro-Adjustment Roll Micro-Adjustment...
- Page 9 Attach Interface Assembly to Projector Loosen part 15, adjust legs then re-tighten. MOUNTING HOLE SHORT LEG ASSEMBLY Unfasten and remove items 15 & 16 and replace item 9 with item 10. Hook Projector onto Ceiling Mount Connect item 6 to item 5 using items 17.
- Page 10 Adjusting the Projector i) To tilt/roll, loosen items 17, adjust an d re-tighten. + / - 13º pitch + / - 6 º roll ii) Micro-adjustment (if installed). Loosen item 17 (M6 x 12mm screws) by one turn using item 29. Micro adjust item 21 (M4 x 30mm screws) using item 29 to roll or tilt the projector.
- Page 11 143.5mm 60mm + / - 13º pitch + / - 6 º roll 80mm Max. 493.5mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
- Page 12 B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd. B-Tech, Better By Design, System 2 and Pro Install are registered trademarks of B-Tech International Design & Manufacturing Ltd. All other brands and product names are trademarks of their respective owners.