Parts List............................................................................................................................................4
Motorised height adjustable floor-to-wall stand (20 pages)
Summary of Contents for B-Tech BT8010
Page 1
Simple installation with all mounting hardware included CONTENTS Installation Safety Notes........................2 Parts List............................4 Installation Instructions........................6 Optional Accessories..........................1 7 Product Dimensions..........................18 B-Tech Contact Details........................20 INSTALLATION TOOLS REQUIRED 17mm (17/26") Pencil Crosshead 12mm (15/32") masonry bit Drill spanner or socket screwdriver B-TECH AUDIO VIDEO MOUNTS www.btechavmounts.com...
Page 2
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions.
Page 3
Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
Page 4
BT8010 PARTS LIST WALL UNIT ASSEMBLY Suitable for loads up to 70kg (154lbs)
Page 5
PART NAME FLAT SCREEN INTERFACE KIT COLUMN (FOR ATTACHING MOUNT TO WALL ATTACHMENT COVER BACK OF FLAT SCREEN) ADAPTOR PLATE HAND LEVER BACK PLATE CROSS RAIL ASSEMBLY INTERFACE ARM M8 x 30mm HEX SCREW M8 METAL WASHER M5 x 12mm PIN HEX SECURITY SCREW M6 METAL WASHER M5 x 12mm SCREW M5 METAL WASHER...
Page 6
INSTALLATION INSTRUCTIONS Fix the wall unit to the wall using the following method. Brick / concrete walls. REMOVE PLASTIC COVERS 12mm (15/32") masonry bit...
Page 8
Fix the back plate to the adaptor plate. i. Remove the screws from the adaptor plate (part 4).
Page 9
ii. Fix the back plate (part 6) to the adaptor plate, using the screws which were removed.
Page 10
Loosen the hand lever (parts 5) and adjust the adaptor plate (part 4) to your desired height. Re-tighten handwheels to fix in position. WARNING Flat screen height can be adjusted when screen is attached. This requires 2 people, and the screen weight must be supported.
Page 11
For VESA 75 x 75mm, 100 x 100mm, 200 x 100mm and 200 x 200mm use the BT7507 (sold separately). Fix the interface to the flat screen. i. Slide the interface arms onto the cross rail assembly.
Page 12
ii. Fix the interface arms to the flat screen. FLAT SCREEN FOR SCREENS WITH RECESS FIXINGS Put required screw into the relevant hole / slot. SCREW INTERFACE WASHER SPACER FLAT SCREEN RECESS...
Page 13
iii. Fix the interface arms to the cross rail assembly. FLAT SCREEN...
Page 14
Attach flat screen (in landscape or portrait). i. Hook on flat screen FLAT SCREEN...
Page 15
ii. Secure in place using parts 11 & 12. FLAT SCREEN...
Page 17
OPTIONAL ACCESSORIES FLAT SCREEN BT7165 (Glass Shelf) BT7165 BT8010 For VESA 75 x 75mm, FLAT 100 x 100mm, 200 x 100mm and SCREEN 200 x 200mm use BT7507 BT7507 BT7507 BT8010...
Page 18
BT8010 PRODUCT DIMENSIONS 140mm 160mm 5.5" 6.3" INTERFACE 755mm 29.7" 280mm 11" 782mm 30.8" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
Page 19
BT8010 PRODUCT DIMENSIONS 82.6mm 3.2" 31.8mm 1.2" 35.9mm 1.4" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.