Connecting Your Accessory To Fastrack - Lionel Pylon Owner's Manual

Connecting your accessory to FasTrack

Y
ou also are able to connect your accessory to FasTrack using the 8" 3-pin female pigtail
cable (available separately, 6-82038). Plug in the 3-pin male connector on the accessory
into the 3-pin female slot on the 3-pin female pigtail. Then attach the red wire to the inside
rail and the black wire to the outside rail.
Note
The white wire is not used when connecting your accessory to FasTrack.
FasTrack
Figure 3. Connecting your accessory to FasTrack
8" 3-pin female pigtail
(6-82038)
Black
wire
3-pin male
connector
3-pin female
connnector
Red wire
Underside of FasTrack
6