Technic; Technical Details; Safety; Intended Use - Holzmann HS 100FLEX User Manual

8 TECHNIC

8.1 Technical details

Blade length
max. sheet thickness
max. cutting length
Handle length
Weight

9 SAFETY

9.1 Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Cutting sheet
Any manipulation of the machine or its parts is a misuse, in this case
MASCHINEN and its sales partners cannot be made liable for ANY direct or indirect
damage.

9.2 Prohibited use

 The operation of the machine outside the stated technical limits described in this
manual is forbidden.
 The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
 The use of the machine for any purposes other than described in this user-manual
is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The unattended operation on the machine during the working process is forbidden.
 It is not allowed to leave the immediate work area during the work is being
performed!

9.3 Safety instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator and
limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security
instructions!
HOLZMANN MASCHINEN GmbH
HS 100FLEX
www.holzmann-maschinen.at
100 mm
1,5 mm
70 mm
460 mm
7 kg
HOLZMANN-
10
HS 100FLEX