Advertisement
Maintenance
3
from the gun.
2)Clean the nozzle orifice with the nozzle
cleaning pin
13
3)Rinse the nozzle
Disposal
• Disposal must be carried out in accordance
with applicable environmental legislation.
• The appliance and its accessories must
be disposed of in accordance with the
materials used in their construction.
• Disposal must be carried out in accordance
with applicable local legislation. Contact
your municipality for the nearest refuse
dumping site.
• As owner of an electrical or electronic
product, you are not allowed by law
(according to EU-Directive 2002/96/EC of
27 January 2003 on waste electrical and
electronic equipment and the particular
GB
national laws of the EU-Member States
transforming this Directive) to dispose of
8
this product or its electrical/electronic
accessories as unsorted domestic waste.
You shall use the designated gratis
possibilities for return instead
Cleaning
provided.
under running water.
3
Disposal
Troubleshooting
Troubleshooting
Fault
The pump does not
start when the switch
is pressed.
Cause
• The plug is not properly
• Faulty electric plug.
• The mains voltage is
• The gauge of the
• The pump has cut out.
Repair
• Connect the plug to the
• Have the electrical
• Check that the system
• See paragraph "Safety
• Turn the switch to ON
Fault
The machine starts, but
no water comes out.
• Pump, hoses or
Cause
• No water supply.
• Unit water filter clogged.
• Nozzle or spray gun
Repair
• Allow the pump and
• Connect the machine to
connected to the
socket.
insufficient.
electrical power lead is
too small.
power socket correctly.
socket checked.
is suitable.
notes / electrical
connection".
while keeping the gun
lever pressed; if the
problem persists
contact an authorised
service centre.
accessories frozen.
orifice clogged.
hoses to thaw.
the water supply system
and turn on the tap.
Advertisement
