Advertisement
Introduction
High pressure washer
SUPERWASH 160
Introduction
Please read this instruction manual
thoroughly, referring to it whenever
necessary before starting a job. This is
because, as with all appliances, the high-
pressure cleaner must be used correctly in
order to ensure optimum performance.
First of all, open both fold-out pages
containing the illustrations, and study then
carefully until you are familiarised with how
the machine works. These pages fold out
in front of and behind the cover of the
instruction manual.
Intended use
The high-pressure cleaner is ideal for all
outdoor cleaning requirements. It may be
used to clean dirty surfaces such as house
walls, verandas and roads.
A range of optional gun-mounted accessories
GB
is available for foam and rotary brush
washing applications.
2
The appliance may also be used to clean
walls, swimming pools, garden furniture and
tools, and to wash vehicles.
Always observe all applicable local legislation
concerning cleaning products.
The machine must never be used for any
purposes other than those specified or
modified, as this may be extremely
dangerous. The manufacturer cannot be
held responsible for damages or injury
resulting from inappropriate use or
modifications.
Do not direct the nozzle toward mechanical
parts containing lubricant grease, as the
grease will dissolve and spread over the
surrounding ground.
Vehicle tyres/tyre valves may only be cleaned
from a minimum distance of 30 cm, otherwise
the vehicle tyre/tyre valve could be damaged
by the high-pressure jet. The first indication
of this is a discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be deadly
dangerous.
Standard equipment
1
Turbo nozzle
2
Rotary brush
3
Nozzle with pressure regulator
4
Gun with pressure gauge
5
Hose reel stand
6
Crank handle
7
Hose reel
8
Wheel axle
9
Hook for power lead
10
Wheel lock plug
11
Wheel
12
Handle
13
Nozzle cleaning pin
14
Accessory holder
15
(a) Nozzle holder
(b) Nozzle stand
R
Rotary regulator
T
Tank cap
S
Concentrated car washing detergent
U
Quick release water inlet connector
Technical specifications
Year of manufacture
Rated voltage
Power rating
Max. delivery
Operating pressure
Minimum intake pressure 1 bar (0,1 MPa)
Maximum intake pressure 10 bar (1 MPa)
Jet recoil on spray gun
Minimum intake rate
Max. intake water
temperature
Storage temperature
Weight
Acoustic pressure
2005
230V
50 Hz
˜
2550 W
max. 8.83 l/min
(530 l/h)
135 bar (+/-10%)
(13,5 MPa)
20N
12 l/min
40° C
away from frost
Not below 0°C
21.35 Kg
L
95db (A)
WA
L
76db (A)
PA
Advertisement
