Advertisement
Usage
mm (1/2").
Caution: Inlet water temperature must
never exceed 40°C;
• Ensure that the high-pressure hose
26
and the hose connector are securely
connected as described in chapter
"Appliance assembly" (photos F and G);
• Screw the mounting
onto the inlet connector.
• Fit the quick-release hose connector
24
onto the garden hose (not supplied).
• Fit the hose connector
.
23
• Open the tap
• Fit the nozzle onto the spray gun. Twist
the nozzle clockwise to secure on the gun;
• Attach the power plug to the socket
• Switch the machine on by turning the main
switch
16
to "ON".
• If the unit motor starts up even without
operating the spray gun
due to air bubbles in the system.
GB
• Press the spray gun lever
air and residual pressure in the hosing;
6
• Fill the detergent tank
approved products, suitable for the type of
job in hand;
• Caution: Ensure that the spray gun is
open every time that the unit is turned on
(main switch
• Avoid opening and closing the gun
repeatedly over a short period.
Spray gun accessories
Caution: Never use the spray gun
without an accessory!
4
Rotary brush
2
The brush
cleaning small surfaces, such as car wheels,
plastic garden furniture, etc.
The rotary spray gun head automatically
aspirates and mixes the detergent.
Nozzle with pressure regulator
You may adjust the operating pressure by
tightly by hand
23
into the mounting
24
19
;
4
, this is probably
to purge any
28
25
with manufacturer-
"ON").
16
1 2 3
2
is particularly suitable for
3
turning the knob at the end of the nozzle
3
(see also photo C)
"-" To reduce operating pressure:
Turn the knob towards "-" for light dirt
and cleaning delicate surfaces (e.g. car)
"+"Increase operating pressure:
Turn the knob towards "+" for stubborn
dirt (e.g. house facings).
Turbo nozzle
The turbo nozzle
for cleaning very dirty surfaces.
Caution: As this nozzle is not fitted with
18
;
a pressure regulator, do not use it to clean
delicate surfaces (e.g. cars).
Automatic Stop System
This appliance is equipped with an AS
system. This system immediately starts the
unit whenever the gun trigger
and switches it off when the trigger is
released.
• Even though the unit is equipped with this
system, never leave it unattended.
• If the machine is left unused for more than
5 minutes, turn the main switch
Spray gun with pressure gauge
The spray gun
integrated pressure gauge. This makes it easy
to check the pressure while you are working.
Spray gun trigger safety catch
The spray gun
engaged trigger mechanism lock system
This is used to lock the trigger and to prevent
accidental activation.
To engage catch
Press the lock button
R
side of the gun
mechanism
28
1
1
is particularly suitable
28
is operated
16
to "OFF".
4
is equipped with an
4
is equipped with a manually
27
on the right hand
4
. Check that the trigger
is blocked.
.
27
Advertisement
