Description - Siemens Simovert Masterdrive FANC-SB Operating Instructions Manual

All manuals and user guides at all-guides.com
03.99
2

Description

The optional CBL board (Communication Board CC-Link) is used for
connecting drives to programmable logic controllers (PLCs) from
Mitsubishi via net protocol CC-Link.
View
system connector
(X705)
Fig. 2-1
Technical The optional board has three LEDs (green, yellow and red) for
information
providing information on the current operating status and four LEDs
about the status of CC-Link.
Power is supplied by the basic unit.
The CBL can be simply plugged into the electronics box of the
converter and works with all software and hardware configurations of
the MASTERDRIVES.
The CBL has a 5-pole open connector (X708) which is provided for
connecting it to the CC-Link bus.
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
Fixing Screw
View of the optional CBL board
Operating Instructions
Description
Fixing Screw
LED (green)
LED (yellow)
LED (red)
5-pole connector
(X708)
3 LED (green)
LED (yellow)
2-1