Cleaning The Rails; Troubleshooting - Siemens HB 151.50 B Instruction Manual

Cleaning the rails

Troubleshooting

Problem
The oven does not work.
The clock display flashes.
The oven does not heat up or
the type of heating selected
cannot be set.
All manuals and user guides at all-guides.com
The rails can be removed for cleaning.
To unhook the rails:
1.
Lift the rail at the front in an upwards direction
2.
and unhook it.
3.
Then pull the whole rail forward and take it out.
Clean the rails using either washing up liquid and a
sponge or a brush.
To hook rails back into position:
First insert the rail in the rear socket,
push it back slightly
and then hook it into the front socket.
The rails fit both the left and right sides. Recess (a)
must always be at the bottom.
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after sales service:
Possible cause
Blown fuse.
Power cut.
Dust on the contacts.
Comments/remedy
Look in the fuse box and check that the
fuse is in working order.
Reset the time.
Turn the function selectors round
completely several times.
29