Internal Line Trigger, External Direction Control, Internal Frame Trigger - Dalsa GiGE Vision Spyder3 Series User Manual

All manuals and user guides at all-guides.com
68 Spyder3 GigE Vision SG-14 Cameras User's Manual
In the Sensor Control Grou p > set the d esired exposure mod e, exposure time and line rate.
Figure 38: Exposure Mode, Time, and Line Rate Settings
Internal Line Trigger, External Direction Control, Internal frame
trigger
Set the Frame Start Trigger and Frame Active Trigger values to off, as d escribed above. Set the Line
Trigger Mod e value to Off and the Exposure Mod e, Exposure Time and Line Rate as above.
In the Direction Control Group > set the Sensor Scan Direction to External.
Set the Input Direction Signal to Line 2 (as d escribed at the start to this section).
Figure 39: Scan Direction
03-032-20123-00 Teledyne DALSA