Option 3: Wireless Connection Via Wireless Card (Factory Default) - Lantronix MatchPort Series Quick Start Manual

b. Disable all wireless security (no encryption, no/open authentication).
5. Select the appropriate power plug adaptor for your geographical location.
Insert it into the slot on the Universal Power Supply; then plug the power
supply into an outlet.
6. Connect the output plug of the power supply to the MatchPort Evaluation
Board.
7. Move the power switch on the Evaluation Board to ON.
This is the last step in 'connection.' The MatchPort is ready for configuration
8. Continue with

Option 3: Wireless connection via Wireless card (factory default)

Ensure the wireless card is running correctly. Change the wireless card
1.
configuration as follows:
a. Set Network name (SSID) to LTRX_IBSS.
b. Select AdHoc network.
c. Disable all wireless security (no encryption, no/open authentication).
2. Select the appropriate power plug adaptor for your geographical location.
Insert it into the slot on the Universal Power Supply; then plug the power
supply into an outlet.
3. Connect the output plug of the power supply to the MatchPort Evaluation
Board.
The final setup should look like this:
Move the power switch on the Evaluation Board to ON.
4.
This is the last step in 'connection.' The MatchPort is ready for configuration
5. Continue with
MatchPort Demonstration Kit Quick Start
Install DeviceInstaller on page
Wireless Connection
Install DeviceInstaller on page
10.
10.
5