Santak Castle On-Line Series User Manual page 4

Safety Instructions
Please read carefully the following user manual and the
safety instructions before installing or operating the unit!
Operation Safety
1. Please read all instructions before operating the equipment and
connecting to mains power, save this manual for future reference.
2. Please pay attention to all the warning indication, understand and
follow all the instruction.
3. Do not install the UPS where it would be exposed to direct sunlight ,
Rain or damp environment.
4. Do not install the UPS near to heating equipment or heating source
and heating environment.
5. Do not block ventilation openings on the UPS's housing. Ensure
the air vents on the front, side and rear of the UPS are not blocked.
Recommended at least 50cm of space on each side.
6. Use dry cloth for cleaning.
7. Use dry-chemical fire extinguisher when UPS present fire danger,
do not use fluid-fire extinguisher, fluid- fire extinguisher will cause
hazards shock.
Electricity Safety
Do not remove the enclosure. This system is to be serviced by qualified
service person only. There are NO USER SERVICEABLE PARTS inside
the UPS.
1. Assure UPS is reliably connected to earth properly verify
connecting wire and battery polarity is correct before turn on UPS
with mains power.
2. If UPS requests moving to another place or reconnecting power
wire, it is imperative to disconnect all the power connections of
UPS, and turn off UPS.