Software - Santak Castle On-Line Series User Manual

through internet/intranet. Please contact your local dealer for further
information. More detail please read the NMC user manual .
CMC card: It provides connection to Modbus protocol with standard
RS485 signal. More detail please check the CMC user manual.
USB+RS232 card: To establish communication between the UPS and a
computer by use an appropriate communication cable to monitor UPS.
Note:
The UPS dealer offer conectivity card box and monitor, installation and
further information please refer the card user manual.If require
WinPower sofare and AS400, NMC, CMC, USB+RS232.Any detail and
further information, please contact STANK service center.

2.11 Software

Free Software Download – WinPower
WinPower is brand new UPS monitoring software, which provides
user-friendly interface to monitor and control your UPS. This unique
software provides safely auto shutdown for multi-computer systems while
power failure. With this software, users can monitor and control any UPS on
the same LAN no matter how far from the UPSs.
- 20 -