Operating A Drip Lubricator; Changing Lubricant - Struers LaboForce-1 Instruction Manual

Operating a Drip Lubricator

(Accessory)

Changing Lubricant

Drip Lubricant
(Accessory)
LaboDoser Dosing Unit
(Accessory)
8
LaboForce-1
Instruction Manual
Position the dosing nozzle in the correct position over the

preparation disc.
Open the valve and adjust the lubricant dosing level.

After completion of the preparation close the valve again to

stop lubricant dosing.
Remove the drip lubricator from LaboForce-1.

Hold the lubricant bottle firmly and remove the top lid.

Pour out the lubricant, and fill the bottle with a mild soap

solution.
Open the valve to clean the tube.

Exchange the soap solution with clean water and repeat the

above procedure.
Empty the lubricator.

Put the lubricator back on LaboForce-1 and tighten the finger

screw.
Refill with lubricant and mount the lid.

Follow the Instructions for Use that are supplied with the Dosing
Unit.