Table of Contents About this manual Getting started Device description Check the packing list Unpack the machine Installation Operating LaboDoser-10 Changing lubricant/suspension Maintenance and service Manufacturer LaboDoser-10...
1 About this manual About this manual Instruction Manuals Struers equipment must only be used in connection with and as described in the Instruction Manual supplied with the equipment. Note Read the Instruction Manual carefully before use. Note If you wish to view specific information in detail, see the online version of this manual.
2 Getting started LaboDoser-10 mounted on a LaboDoser-10 table stand Check the packing list The packing box contains the following items: Pcs. Description LaboDoser-10 unit with1 liter bottle Allen key 3 mm Bracket for doser arm Hexagonal socket screws Instruction Manual set...
Hint If lubricant or suspension is not to be used for a prolonged period of time, remove the bottle from the bottle holder and store it upright. LaboDoser-10 can be mounted on the column of the following units: • LaboUI •...
3. When the preparation step has been completed, close the valve to stop dosing. Changing lubricant/suspension Struers recommends using a separate bottle cap for each consumable. To use the bottle cap with another consumable: 1. Remove the bottle. 2. Hold the bottle firmly and remove the bottle cap.
Page 8
Responsibility of the manufacturer The following restrictions should be observed, as violation of the restrictions may cause cancellation of Struers legal obligations. The manufacturer assumes no responsibility for errors in the text and/or illustrations in this manual. The information in this manual is subject to change without notice.
Page 10
Tõlked leiate aadressilt Katso käännökset osoitteesta Pour les traductions, voir Za prijevode idite na A fordítások itt érhetők el Per le traduzioni consultare www.struers.com/Library 翻 訳 については、 Vertimai patalpinti Tulkojumus skatīt Voor vertalingen zie For oversettelser se Aby znaleźć tłumaczenia, sprawdź...
Need help?
Do you have a question about the LaboDoser-10 and is the answer not in the manual?
Questions and answers