Voice Activated Camera Positioning - TANDBERG D12155-10 User Manual

Voice Activated Camera Positioning

Through Voice Activated Camera Positioning and the use of two microphones, the camera will automatically view
the current speaker.
Setup
Before using camera tracking, the camera positions used must be stored at presets P7 (Mic1) and P8 (Mic2).
E : T
XAMPLE HE CAMERA POSITION STORED AT
SHOULD BE INCLUDED IN THE
AUTOMATICALLY SELECTED
Activating
Enable Camera Tracking by pressing 'CamTrack On' in the 'Preset 0-9' menu, which is activated by
presets
pressing the P button on the remote control. An on-screen indicator 'CamTrackOn' will appear.
P
When activating another video source (e.g., document camera), camera tracking will be temporarily
disabled until you re-select MainCam or a MainCam preset.
mic off
Pressing M O
IC
A Voice Detector makes the system more tolerant of noise and ensures the camera not to be moved by
noise such as paper shuffling, etc.
Deactivating
Disable Camera Tracking by:
• moving the camera manually.
• activating a MainCam preset when MainCam is already activated.
• disconnecting the call.
An on-screen indicator 'CamTrackOff' will appear.
TIP
T
HE CAMERA TRACKING SPEEDS MAY BE ALTERED IN THE
TANDBERG Videoconferencing System
P7
MUST BE RELATED TO
P7 . W
CAMERA POSITION ETC
.
will temporarily disable camera tracking.
FF
'V
M 1,
IC THEREFORE ALL PARTICIPANTS WHO ARE LOCATED CLOSEST TO
HEN CAMERA TRACKING IS ACTIVATED AND A PERSON CLOSE TO
S ' . S 'A
IDEO ETTINGS MENU EE DVANCED USE
33
General use
M 1 , P7
IC SPEAKS
' .
FOR FURTHER DETAILS
M 1
IC
WILL BE