Component Identification; Hpe Edgeline El300 Converged Edge System Configurations; Front Panel Component; Rear Panel Components - HPE Edgeline EL300 Maintenance And Service Manual

Component identification

This chapter describes the external and internal server features and components.

HPE Edgeline EL300 Converged Edge System configurations

The HPE Edgeline EL300 Converged Edge System is available in the following configurations for 9-36 VDC and 12 VDC power
supply options:
• HPE Edgeline EL300 Converged Edge System with no daughter card.
• HPE Edgeline EL300 Converged Edge System with 4 ports 1GBE Ethernet with TSN support daughter card.
• HPE Edgeline EL300 Converged Edge System with 2 ports RS232/422/485 opto isolated daughter card.
• HPE Edgeline EL300 Converged Edge System with 2 ports CAN Bus A/B/FD 2.0 opto isolated daughter card.
• HPE Edgeline EL300 Converged Edge System with 8 Bits Configurable GPIO daughter card.
For information on the daughter cards, see the HPE Edgeline EL300 Daughter Card Getting Started Guide on www.hpe.com/
support/EL300-DaughterCard-GSG-en.

Front panel component

Item
1

Rear panel components

The HPE Edgeline EL300 Converged Edge System is available in different configurations. Depending on the daughter card
installed in the system, the rear panel components for the system will change.
For rear panel component identification, see the following:
• Rear panel components when no daughter card is installed
• Rear panel components when 4 ports 1GBE Ethernet with TSN support daughter card is installed
Description
Top cover
Component identification 43