Siemens SIMATIC HMI Operating Instructions Manual page 61

● WinCC flexible for power users
● WinCC flexible options
Online availability
Technical documentation on SIMATIC products and SIMATIC systems is available in
PDF format in various languages at the following addresses:
● SIMATIC Guide Technical Documentation in German:
● SIMATIC Guide for Technical Documentation in English:
Screens
The HMI device is sometimes shown in the form of photographs in these operating
instructions. The photographs of the HMI device may differ slightly from the factory state of
the HMI device.
Conventions
Configuration and runtime software differ with regard to their names as follows:
● "WinCC flexible 2005" for example, refers to the configuration software.
● "WinCC flexible Runtime" refers to the runtime software that can run on HMI devices.
The following text notation will facilitate reading these operating instructions:
Notation
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Industrial USB Hub 4
Operating Instructions, 09/2007, A5E00471973-02
Based on an example project, this is a step-by-step introduction to the basics of
configuring logs, project reports, scripts, user management, multilingual projects and
integration in STEP 7.
Based on an example project, this is a step-by-step introduction to the basics of
configuring the WinCC flexible Sm@rtServices, Sm@rtAccess and OPC server options.
"http://www.ad.siemens.de/simatic/portal/html_00/techdoku.htm"
"http://www.ad.siemens.de/simatic/portal/html_76/techdoku.htm"
The term "WinCC flexible" is used in a general context. The full name, for example
"WinCC flexible 2005", is always used when it is necessary to differentiate between
different versions of the configuration software.
Scope
Terminology that appears in the user interface, for example
•
dialog names, tabs, buttons, menu entries
Inputs required, for example limit values, tag values
•
Path information
•
Operational sequences, for example, menu commands, context
menu commands
Keyboard operation
Preface
63