Siemens SIMATIC HMI Operating Instructions Manual page 59

Safety Guidelines
Preface
Purpose of the operating instructions
These operating instructions provide information based on the requirements defined by DIN
8418 for mechanical engineering documentation. This information relates to the place of use,
transport, storage, mounting, use and maintenance.
These operating instructions are intended for:
● Users
● Commissioning engineers
● Service technicians
● Maintenance technicians
Please read the section "Safety instructions and general notes" carefully.
The help integrated in WinCC flexible, the WinCC flexible Information System, contains
detailed information. The information system contains instructions, examples and reference
information in electronic form.
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
It is also assumed that those using the manual have experience in using personal computers
and knowledge of Microsoft operating systems.
Operating instructions application area
The operating instructions apply to the Industrial USB Hub 4.
Position in the information landscape
These operating instructions form part of the SIMATIC HMI documentation. The following
information provides you with an overview of the SIMATIC HMI information landscape.
User manuals
● WinCC flexible Micro
● WinCC flexible Compact/ Standard/ Advanced
Industrial USB Hub 4
Operating Instructions, 09/2007, A5E00471973-02
Describes basic principles of configuration using the WinCC flexible Micro Engineering
System.
Describes basic principles of configuration using the WinCC flexible Compact
Engineering System/WinCC flexible Standard/WinCC flexible Advanced.
61