Electrical Wiring - REMKO KWK Series Operation,Technology,Spare Parts

Horizontal mounting
The condensate drainage line
can be connected directly
to the condensate tray. If a valve
assembly is used, the condensate
is conveyed to the unit's pan and
is drained from there.
Condensate drainage connection
Vertical mounting
Condensate drainage connection
KWK Horizontal mounting
CAUTION
The condensate drainage connection
of the condensate tray which is not
used must be permanently sealed
(a cap or similar).
Horizontal mounting
Condensate drainage connection

Electrical wiring

CAUTION
All electrical installation work
is to be performed by specialist
companies. Disconnect the power
supply when connecting
the electrical terminals.
We recommend installing
■
a master / repair switch
provided by the customer close
to the indoor unit.
The power supply is made
■
at the indoor unit, a control line
to the chiller is not necessary.
If a condensate pump, which
■
is available as an accessory,
is used in conjunction with
the unit, the pump switch-off
contact switches off the power
supply or the valve if necessary.
The terminal block for making
■
the connections and the plug
are located behind the unit's
cover on the right side
of the unit.
Possible accessories
Room temperature controller
The room temperature
■
controller operates the unit.
The controller can be wall-
mounted or installed in the unit,
as required. Follow the separate
Installation Instructions.
Switch relay for 4 units, if appropriate
If several units are to be controlled
■
together in a group, a switch relay
is necessary if a room temperature
controller is used.
Follow the separate Installation
Instructions.
Heating element if necessary
The heating element allows
■
the rooms to be heated
electrically via the controller.
Follow the separate Installation
Instructions.
17