Power Connection And Hazardous Voltage; Servicing; Accessories; Communication Lines - TANDBERG Gatekeeper User Manual

Tandberg gatekeeper user guide
Hide thumbs Also See for Gatekeeper:
Table of Contents

Advertisement

1.4.7.

Power connection and Hazardous voltage

The product may have hazardous voltage inside. Never attempt to open this product, or any
peripherals connected to the product, where this action requires a tool.
This product should always be powered from an earthed power outlet.
Never connect attached power supply cord to other products.
In case any parts of the product has visual damage never attempt to connect mains power, or
any other power source, before consulting service personnel
The plug connecting the power cord to the product/power supply serves as the main disconnect
device for this equipment. The power cord must always be easily accessible.
Route the power cord so as to avoid it being walked on or pinched by items placed upon or
against it. Pay particular attention to the plugs, receptacles and the point where the cord exits
from the apparatus.
Do not tug the power cord
If the provided plug does not fit into your outlet, consult an electrician. Never install cables, or
any peripherals, without first unplugging the device from its power source.
1.4.8.

Servicing

Do not attempt to service the apparatus yourself as opening or removing covers may expose you
to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to qualified
service personnel.
Unplug the apparatus from its power source and refer servicing to qualified personnel under the
following conditions:
If the power cord or plug is damaged or frayed.
o
If liquid has been spilled into the apparatus.
o
If objects have fallen into the apparatus.
o
If the apparatus has been exposed to rain or moisture
o
If the apparatus has been subjected to excessive shock by being dropped.
o
If the cabinet has been damaged.
o
If the apparatus seems to be overheated.
o
If the apparatus emits smoke or abnormal odor.
o
If the apparatus fails to operate in accordance with the operating instructions.
o
1.4.9.

Accessories

Use only accessories specified by the manufacturer, or sold with the apparatus.
1.4.10.

Communication lines

Never touch uninstalled communication wires or terminals unless the telephone line has been
disconnected at the network interface.
Do not use communication equipment to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord (ISDN
cables).
TANDBERG Gatekeeper User Guide
Page 11 of 105

Advertisement

Table of Contents
loading

Table of Contents