Logged Events - TANDBERG Gatekeeper User Manual

14.5.

Logged Events

Events logged at level 1
Event
Eventlog Cleared
Admin Session Start
Admin Session Finish
System Configuration
Changed
Policy Change
Registration Requested
Registration Accepted
Registration Rejected
Registration Removed
Call Answer Attempted
Call Attempted
Call Connected
Call Disconnected
Call Rejected
Call Bandwidth Changed
Description
An operator cleared the event log.
An administrator has logged onto the system.
An administrator has logged off the system.
An item of configuration on the system has changed.
The Detail event parameter contains the name of the changed
configuration item and its new value.
A policy file has been updated.
A registration has been requested.
A registration request has been accepted.
A registration request has been rejected.
The Reason event parameter contains the H225 cause code.
Optionally, the Detail event parameter may contain a textual
representation of the H.225 additional cause code.
A registration has been removed by the Gatekeeper/Border
Controller.
The Reason event parameter specifies the reason why the
registration was removed. This is one of:

Authentication change

Conflicting zones

Operator forced removal

Operator forced removal (all registrations removed)
An attempt to answer a call has been made.
A call has been attempted.
A call has been connected.
A call has been disconnected.
A call has been rejected.
The Reason event parameter contains a textual representation of
the H.225 additional cause code.
The bandwidth of a call has changed.
TANDBERG Gatekeeper User Guide
Page 60 of 105