Feedback; Register Status; Register History - TANDBERG Gatekeeper User Manual

16.5.

Feedback

The feedback root command, xfeedback, is used to control notifications of events and status changes
on the Gatekeeper.
A Feedback Expression describes an interesting event or change in status. When a Feedback Expression
is registered, a notification will be displayed on the console for each occurrence of the event described
by that Expression. Notifications will continue to be displayed for a given event until the Expression is
deregistered.
To list all xfeedback commands type:
xfeedback ?
To list all currently active feedback expressions, type:
xfeedback list
To register a feedback expression, type:
xfeedback register <expression>
To deregister the feedback expression with index <n>, type:
xfeedback deregister <n>
To deregister all feedback expressions, type:
xfeedback deregister 0
16.5.1.
xfeedback Register Status
Registers for all status changes.
xfeedback Register Status/<Calls/Registrations>
Registers for feedback on changes in the status of either calls or registrations only.
16.5.2.
xfeedback Register History
Registers for feedback on all history.
xfeedback Register History/<Calls/Registrations>
Registers for feedback on history of either calls or registrations only.

Register status

Register History

TANDBERG Gatekeeper User Guide
Page 91 of 105